Double Glazing Door Locks
Many homeowners choose double-glazed windows and doors for their energy efficiency, insulation, and sound reduction. But, they also serve as an effective deterrent for burglars.
To increase the security of your double-glazed windows, make sure they have been fitted with anti-jemmy hinges. These special hardware components make it extremely difficult to pry the sashes of your windows open.
Multi-point locking
Multipoint door locks are among the most reliable security devices you can put in at your workplace or in your home. They are virtually impossible for anyone to pick or break and can be a fantastic option to add to any security system. They also can improve your energy efficiency by cutting down on drafts in the doorframe and enhancing the seal.
Multi-point locking systems are composed of a deadbolt, live bolt, and hook bolts located above and beneath the latch. They also include flush bolts which lock into the door's head and the sill. They typically extend the most, if not all across the entire width of the door. These systems are often referred to as "full-width", in commercial contexts. They are used to secure the entire opening of the door.
The majority of uPVC doors have multi-point locking, but certain timber doors are equipped with this level of security. This type of lock offers an increased security level than regular locks and is often be specified as part of an approved by the police Secured by Design initiative for new homes.
If a uPVC door that has a multi-point lock has been closed, the outside handle operates the latch bolt. The inside handle is locked by turning the lock's thumbturn on the inside of the door with the handle raised or with a key. You should always use a key to lock your door once it's closed. Attempting to force the deadbolt or latch bolt with a handle may damage the lock as well as the hinges.
If your uPVC multi-point lock doesn't function correctly it could be because it's misaligned with the frame of the door. You can check this by placing a spirit level on the top of the door, and looking for gaps in the miter joints where the frame meets the door.
It is worth asking your double glazing specialist whether there's a gap and to fix it. They'll be able to replace the lock on your behalf or install a new one. They'll be able to tell whether the issue is caused by damage to the frame or the lock unit. In these cases, they'll be able to repair or replace your multipoint lock to make it work again.
Espagnolette locks
Espagnolette locks are now a standard locking mechanism for double-glazed uPVC windows. They can be identified by their flat strip design which moves as you turn the handle. They are used with multi-point locks around the frame of your window to secure the window and lock it. If you are looking to improve your uPVC window handles, espagnolette handles can be used for new builds or renovations. They are available in a broad variety of styles, including period and contemporary. They also offer a wide variety of bar sizes and backset options, as well as mushroom cam heights and a variety of profiles that can be used for every application.
RepairMyWindowsAndDoors is a popular choice but has been criticized for providing a low level of security for French doors. A single locking point located in the middle of the door can be easily bypassed. It is also possible for thieves to open French doors by pushing the handle to the left or left. These doors are usually the main entry points into your home, and they should be secured to reduce the chance of unauthorized intrusion.
Although they are referred to as espagnolette locks, these locks aren't bolts they are actually a one-piece mechanism that fits externally onto the edges of your French doors or internally on a casement window frame. The mechanism is operated with the help of a handle. It is comprised of a rod with hooks at its sill and head. The hooks are inserted into sockets on the window frame. When the window's handle is operated it moves the rod up and down. The hooks then lock into their receivers.
These are an excellent solution for those who wish to enhance the security of French doors without compromising on the design and aesthetics of the door. These handles can be paired with a variety of other styles and can even be master keyed to give you added peace of mind.
Similar to cockspur handles espagnolette handle designs come in both inline and cranked models to fit the shape of your window. Inline versions turn in the same direction as the original. Cranked versions come in right- and left-handed versions.
Laminated glass
Laminated glass is commonly used for windows since it is extremely difficult to break. It is also more secure than standard safety glass as it is fused into a single piece rather than breaking into sharp shards. This makes it perfect for homes and commercial properties.
Lamination is the process of combining two pieces flat glass with an interlayer of plastic. The whole piece is then heated and placed under pressure to make it strong enough to serve as a window or door. The resulting laminated glass is five times stronger and 100 times more rigid than glass that is tempered. It also withstands greater impacts and resists weathering.
This kind of glazing is perfect for use in construction sites that require high performance for safety, such as increased security (impact resistant glass), UV protection or noise reduction. Laminated glass can be paired with a high-performance coating in order to improve thermal insulation as well as solar control. It comes in a range of options to suit your project and budget.
Laminated glass is more secure to use than tempered glass because it is able to be cut after the fact. It is less likely to break if it's cut from the sides of the glass, rather than the edge. This makes it a good option for glass that does not open or close, such as cellar windows.
It is also used in high-rise structures in urban areas because it can reduce the volume of noise that is transmitted from the street to the interior of the. The Saflex PVB interlayer in the laminated glass also helps to block some of the sun's damaging UV rays, which prevents discoloration of fabrics and furnishings.
While laminated glazing is generally more expensive than glass that has been tempered, it comes with numerous advantages that could save you money over the long term. It is also more durable and resistant to abrasions and scratches. It can be created to meet your specific requirements. It's also less susceptible to heat damage, and is an ideal choice for high-rises and coastal areas. Certain building codes also require that exterior doors and some interior windows are made from glass laminated.
Friction hinges
Friction hinges are designed to hold and support the position of doors, flaps, panels, and windows. They also can withstand the motion of other hinges, and also prevent an unintentional opening and closing. They are available in a variety of sizes and shapes. They can have different amounts of torque which are the forces that determine how long hinges will stay open or closed.
Aluminum is an excellent material for friction hinges due to its strength, durability, resistance to corrosion, and high strength-toweight ratio. It is lightweight and easy-to-handle. It can also be crafted into a variety of finishes and is easy to install and repair. Brass is a different material that is widely used for friction hinges. Brass is an alloy made of copper and zinc which has a natural resistance to corrosion. It is stronger and more durable than stainless steel, but is more expensive.
The hinges with friction used in uPVC double glazing door systems can be tailored to meet the specific needs of the particular application. These customizations may include the amount of damping, the viscosity of the lubricant, the degree of tolerance to space between components, and environmental conditions where the hinge will be utilized. These factors can impact the dynamic torque of hinges. It is crucial to be aware of the metric when in critical applications.
There are a variety of friction hinges, such as one-way and detent. One-way friction hinges have constant torque in one direction, whereas detent friction hinges have no torque in the opposite direction. Other variations include discs, pipe and curl friction. Every type of friction hinge has a unique set of characteristics that make it more or less effective in particular applications.
Friction hinges are also referred to as hinges that stop free since they permit doors or lids to remain at an angle after the force has been removed. This helps prevent injuries through accidental closing. This kind of hinge is ideal for use in medical, rugged or hazardous environments. The hinges can be set to provide different levels of free play and can be designed to function in a variety of angles.